 |
Manufacturers of ASME/ANSI A112.19.8-2007
Approved Drain Covers
The following companies, listed alphabetically, manufacture pool and spa drain covers of various sizes and have represented to CPSC staff that their covers meet the ASME/ANSI A112.19.8-2007 standard, as required by the Virginia Graeme Baker Pool and Spa Safety Act, Section 1404(c)(1)(A)(i).
The CPSC is providing this information as a convenience to pool owners and operators. The CPSC does not provide approval or endorsements for any of these companies or their products. Other companies not listed may also manufacture products that meet the requirements of the law.
Last updated 7/07/2009
A&A Manufacturing
Division of Shasta Industries Inc.
3750 West Indian School Road
Phoenix, AZ 85019
Michael Marshall
Tel: (800) 851-8492
Fax: (602) 532-4896
Michael.Marshall@aamfg.com
www.aamfg.com
www.UnblockableDrain.com
Dimensions: 3 1/2" x 31" channel drain
|
|
Afras Industries Inc.
766 Hampshire Road, Unit A
Westlake Village, CA 91361
Reza Afshar
Tel: (805) 230-0011
Fax: (805) 230-0062
www.afrasinc.com
Dimensions: 7 3/8" dia. ; 11.125" dia. and 12"x12"
|
|
|
Color Match Pool Fittings
15754 W. Christy Dr.
Surprise, AZ 85379
Todd Krombein
Tel: (623) 337-4120
Fax: (623) 337-4126
todd@poolfittings.com
sales@poolfittings.com
www.poolfittings.com
Dimensions: 8" Round, 10" Round.
|
Current Systems, Inc.
621 Via Alondra Ste. 607
Camarillo, CA 93012
Tel: (866) 372-8886 (California)
Tel: (888) 443-4113 (Florida)
Fax: (805) 482-1041
805-482-1041
sales@current-systems.com
www.current-systems.com
Floor and Wall drain covers:18"x23" and 20"x44"
Field fabricated sumps and grates available
|
Drain Safe/New Water Solutions
Ron Schroader
Lake Worth, FL
Tel: (561) 433-2580
Ron@drainsafe.com
www.drainsafe.com
Dimensions: 11" diameter cover, will fit 5 1/2" - 8" Diameter Sumps, and retrofit smaller 5" sumps with additional knockouts
|
|
|
Lawson Aquatics, Inc.
4431 Corporate Square
Naples, FL 34104
Bob Fink, Product Manager
Tel: (800) 897-6160 Tel: (239) 435-3700
Fax: (239) 435-3708
www.lawsonaquatics.com
Dimensions: 9”x9” Sump and Grate and 9”x9” Frame and Grate; 12"x12", 18"x18", 24 x24" (one inch increments in one direction and no more than 21" unsupported span in the other direction); and 18"x36" (and larger sizes in increments of 18")
|
Neptune-Benson, Inc.
6 Jefferson Drive
Coventry, RI 02816
800-832-8002
401-821-2200
www.NeptuneBenson.com
Steve Hawksley, Technical Services Direct
shawksley@neptunebenson.com
Dimensions: 30"x30" fiberglass AEGIS Shield, 100% perimeter suction
|
Paddock Industries Inc.
555 Paddock Parkway
Rock Hill, SC 29730
Mike Schuett, Executive Vice President
Tel: (800) 849-2729
www.paddockindustries.com
Dimensions: 20"x20" and 24"x24", can be installed in multiples
|
Paramount Pool and Spa Systems
295 E. Corporate Place, Ste. 100
Chandler, AZ 85225
Dominic Conn, Director of Engineering
Tel: (480) 893-7607
DCONN@1paramount.com
www.1paramount.com
Dimensions: Will fit drains up to 10" diameter
|
Pentair Water Pool and Spa
1620 Hawkins Avenue
Sanford, NC 27330
Tel: (800) 831-7133 (Customer Service)
Tel: (800) 831-7133 (Technical Service)
Fax: (919) 566-8926 (Customer Service)
Steve Barnes
Steve.Barnes@PentairWater.com
www.PentairPool.com
Dimensions: 8" round drain cover, fits frames over field built sumps and manufactured sumps
|
|
Triodyne Safety Systems LLC.
3054 N. Lake Terrace
Glenview, Illinois 60025
Tel: (847) 486-9640
Fax: (847) 486-9645
Pete Warner
petew@triodyne.com
www.antihairsnare.com
Dimensions: 8" round drain cover
|
|
World Wide Sports LLC
112 South Hanley Road
Suite 101
St. Louis, MO 63015-3418
Harry Newhart
Tel: (314) 863-0040
www.worldwidesportsllc.com
Dimensions: 13" diameter cover, fits 5" to 10" round
|
McNichols Company
2502 North Rocky Point Dr., Suite 950
Tampa, FL 33607-1447
Tel: (800) 237-3820
Fax: (813) 288-9342
sales@mcnichols.com
www.mcnichols.com/vgb
Custom size fiberglass field fabricated large area grates.
Call or e-mail us for assistance in finding Registered Design Professionals in your area.
|
|
Manufacturers of ASME/ANSI A112.19.17 or ASTM F2387 Approved
Safety Vacuum Release Systems
The following companies, listed alphabetically, manufacture safety vacuum release systems and have represented to CPSC staff that their systems meet the ASME/ANSI A112.19.17 or ASTM F2387 standards, as required by the Virginia Graeme Baker Pool and Spa Safety Act, Section 1404(c)(1)(A)(I).
The staff is providing this information as a convenience to pool owners and operators. The CPSC does not provide approval or endorsements for any of these companies or their products. Other companies not listed may also manufacture products that meet the requirements of the law.
Last updated 2/13/2009
A.O. Smith EPC
531 North Fourth Street
Tipp City, OH 45371
www.aosmithmotors.com/Products/
Guardian/
A.O. Smith – Guardian – with eMod Electronics
[Note: eMod Motors and Guardian Motors with eMod electronics also qualify as an automatic pump shut off system.
|
A.O. Smith EPC
Contacts:
- Midwest and Northeast
Greg Fritz
Tel: (937) 609-6342
- Florida / Southeast
John Alexander
Tel: (813) 335-0879
- West
Bill DeCorrevont
Tel: (602) 300-4664
|
|
|
Pentair Water Pool and Spa
1620 Hawkins Avenue
Sanford, NC 27330
Tel: (800) 831-7133
(Customer Service)
Tel: (800) 831-7133
(Technical Service)
Fax: (919) 566-8926
(Customer Service)
Steve Barnes
Steve.Barnes@PentairWater.com
www.PentairPool.com
|
|
Vac-Alert™ Industries LLC
Santa Rosa, CA 95401
Paul Pennington
Tel: (800) 374-7405
Fax: (707) 576-8286
www.vac-alert.com
|
Vacless™ Systems Inc. Pool and Spa Safety Products
Simi Valley, CA 93063
John Steffen
Tel: (877) 822-5377
Tel: (818) 899-1700
Fax: (818) 899-1744
john@vacless.com
www.vacless.com
|
|
For more information on the following products visit the websites listed above, and for more information on entrapment code call NESPA (609)689-9111
Please note: This release is for informational purposes only. NESPA does not endorse any of the products listed.
|
|
|
|
|
